Steve, Awesome video and cool project. I'll be building a few of these. Thank
you Fred KB4QZH
-------- Original message --------From: steve_VE6WZ <ve6wz@shaw.ca> Date:
11/8/22 12:01 PM (GMT-05:00) To: topband@contesting.com Subject: Topband:
Signal source flown under my drone Here is a short video showing some of the
small signal sources I have built and how I can fly them under my drone for
testing my RX antennas on 160m.Using these simple clock oscillators as a 160m
signal source is not new, but I show a couple of small units I built up using
the old legacy DIP cans as well as a SMD that can be flown under my small Mavic
Mini drone.I include some PCB Gerber files and a
BOM.https://youtu.be/EGAIrhGG51Y73, de steve ve6wzSent from Mail for
Windows_________________Searchable Archives: http://www.contesting.com/_topband
- Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|