The twin-ax has found a new home...thanks to all that responded.
73,
Charlie, N0TT
On Fri, 29 Jul 2022 23:20:08 +0000 <n0tt1@juno.com> writes:
> Fellow Topbanders,
>
> I have 100ft of Twin-Ax "coax" that is surplus to my needs.
>
> It has a double shield, tight silver braids, blue and white colored
> twisted pair #18 solid copper,
> poly insulation, ~120-Ohms, about 1/2" overall diameter.
>
> IIRC, Twin-Ax is very desirable for the Waller Flag and some
> other low noise antennas.
>
> It was used in a commercial, "spare no expense" communications
> setting.
> It is
> very high quality and was used totally indoors.
>
> It does have a lightly abraded area *about* 1/3 way from one end.
> The
> outer
> sheath (black) is showing through for a length of about 2", but the
> shield itself
> is undamaged. I made no attempt to tape it, etc, and I clearly
> marked
> the abraded area
> to be covered/repaired by the buyer. Photo available.
>
> It will fit in a economical "Priority Mail Regional Rate Box B"
> which
> would cost
> <$17 from Kansas City to say, Miami, FL.
>
> Asking $60 for it plus shipping.
>
> 73,
> Charlie, N0TT
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|