| To: | topband@contesting.com |
|---|---|
| Subject: | Topband: 160 Receiving Loops source? |
| From: | "Eric Rosenberg" <ericrosenberg.dc@gmail.com> |
| Reply-to: | Eric Rosenberg <ericrosenberg.dc@gmail.com> |
| Date: | Thu, 04 Feb 2021 19:27:28 +0000 |
| List-post: | <mailto:topband@contesting.com> |
With my antenna supports gone and living on a small city lot
(Washington, DC), I'd like to try an 80/160 loop.
I have some physical limitations that make mechanical skills mediocre at best for building one, and am looking for an affordable source for a built one. Spencer Ritchie, KC2TX, has them listed on his website (https://www.qsl.net/kc2tx/lb_loop2.htm), but in correspondence from November, he said no, he doesn't make them anymore. Does anyone else make an affordable one? Thanks & 73, Eric W3DQ _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: Looking for recommendation for cutting tool for RG-6 with CCS center conductor, Richard (Rick) Karlquist |
|---|---|
| Next by Date: | Topband: W0FLS: "hi rx antenna" is..., W3HKK |
| Previous by Thread: | Re: Topband: Looking for recommendation for cutting tool for RG-6 with CCS center conductor, Roger Parsons via Topband |
| Next by Thread: | Re: Topband: 160 Receiving Loops source?, Richard (Rick) Karlquist |
| Indexes: | [Date] [Thread] [Top] [All Lists] |