Topband
[Top] [All Lists]

Re: Topband: YCCC 9 Vertical Array Preamplifiers

To: topband@contesting.com
Subject: Re: Topband: YCCC 9 Vertical Array Preamplifiers
From: Henk Remijn PA5KT via Topband <topband@contesting.com>
Reply-to: Henk Remijn PA5KT <pa5kt@remijn.net>
Date: Wed, 4 Mar 2020 09:13:49 +0100
List-post: <mailto:topband@contesting.com>
I think it is more interesting for the Topband community that you publish your design and let the people build their own.

73 Henk PA5KT

Op 4-3-2020 om 01:31 schreef Lee STRAHAN:
     There seems to be some confusion about.
  Let me explain the significance of Joel's comment about the high impedance 
amplifiers. I have developed new versions of the Hi-Z amplifiers I use in the 
Hi-Z array products. Joel W5ZN was given a set of these Hi-Z amps as a Beta 
test in the field for my new design. The whole purpose of one version (-6dB 
version) was to replace any of the really old amplifiers sold with the early 
arrays and to retrofit directly into the YCCC arrays. The new design has 
several advantages including Low Noise, more gain/phase accuracy, lower cost, 
and higher IMD specs compared to our older amps.
    8 of these amps were also given to Eric NO3M for a beta test in his 630 
meter 8 circle receiving array to replace the YCCC designed amps. I am happy to 
say they participated in his recent record 630 meter contact to VK4.
    There is also another version called the Plus V2 version that has 6 dB more 
gain and will replace the current version in most new arrays and production as 
time goes on.
  The amps have been submitted to DX Engineering and will show up in their 
offerings soon.
    Sorry for the shameless plug but some information was needed.
Lee   K7TJR  OR

-----Original Message-----
From: Topband <topband-bounces+k7tjr=msn.com@contesting.com> On Behalf Of 
w5zn@w5zn.org
Sent: Sunday, March 1, 2020 9:52 PM
To: topband <topband@contesting.com>
Subject: Re: Topband: YCCC 9 Vertical Array Preamplifiers

Allow me to clarify my post. I was referring to the high impedance amplifiers 
at the vertical elements, not the 2N5109 preamp used sometimes post combiner.

73 Joel W5ZN


On 2020-03-01 20:27, w5zn@w5zn.org wrote:
As an alternative to the 2N5109 preamps, last year I acquired a set of
HiZ preamps to use on my YCCC 9 Circle array elements. They work
exceptionally well and exhibit a lower noise figure that I experienced
with the original YCCC amps.

I mentioned this solely for information with no other purpose as I
realize some like to use a simpler amplifier design that they can
build and/or repair. If you have an interest other than what has been
mentioned you can contact Lee at HiZ.

73 Joel W5ZN
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>