Exactly how does this affect your F/B ratio? Is that in your video?
73 Mike
W0BTU
On Thu, Jan 16, 2020, 12:47 PM VE6WZ_Steve <ve6wz@shaw.ca> wrote:
> Over the years I have noticed my Beverage feed impedance will change
> during the winter.
> ...
> To test my theory, I add some radials to both the feed and termination and
> rescan the Beverage.
> Join me on the adventure to see how it worked out in this video as I brave
> the -38 C winter cold. I also show some calculations of the effect of cold
> weather on Beverage wire conductivity and the termination resistor. This
> is perhaps the most interesting, because the term resistors I use are
> ceramic units which have a significant negative temperature coefficient. I
> experiment to confirm the changes in resistance with temperature.
>
> YouTube vid here: https://youtu.be/0XevB7wLInE
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|