To: | topband@contesting.com |
---|---|
Subject: | Topband: BOG. |
From: | Edward via Topband <topband@contesting.com> |
Reply-to: | Edward <navydude1962@yahoo.com> |
Date: | Thu, 1 Aug 2019 14:12:43 -0700 |
List-post: | <mailto:topband@contesting.com> |
I plan to lay down a BOG that is approx 600’. I realize the ideal length for a 160 BOG is about 200’. But I also enjoy BCB DX so a longer one will work better for that. Should I also use the 600’ BOG for 160 or lay down a separate shorter one for 160? I would run parallel approx 2-3 feet apart. Can be fed separately. Also understand that wire should have think insulation to isolate from ground. Plan to make these bidirectional. Thoughts appreciated. 73, Ed NI6S _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: FT-8 performance, K4SAV |
---|---|
Next by Date: | Re: Topband: FT-8 performance, Richard (Rick) Karlquist |
Previous by Thread: | Re: Topband: Beverage length, Drew Vonada-Smith |
Next by Thread: | Re: Topband: BOG., K4SAV |
Indexes: | [Date] [Thread] [Top] [All Lists] |