Topband
[Top] [All Lists]

Re: Topband: BOG height

To: topband@contesting.com
Subject: Re: Topband: BOG height
From: "John Harden, D.M.D." <jhdmd@bellsouth.net>
Date: Thu, 1 Aug 2019 13:29:46 -0400
List-post: <mailto:topband@contesting.com>
It's hard to beat the Hi-Z arrays when you have limited space..

73,

John, W4NU

On 8/1/2019 1:23 PM, Chuck Dietz wrote:
When I tried a BOG compared to a Beverage, I found the BOG to be almost
useless compared to the Beverage. I would put up one of the arrays K9AY,
SAL-30, 4sq rec, etc.
I don't think you will be happy with a BOG after using a Beverage.

Chuck W5PR

On Thu, Aug 1, 2019 at 12:08 PM Paul Mclaren <paul.mcl@gmail.com> wrote:

Just a ???simple??? question hopefully - How close to the ground should a BOG
be for best/good performance?

I am looking for any additional info that I can get to supplement what I
have found online already so good on the balun, wire type and termination
resistor.

My single unterminated beverage I have at the moment was transformational
compared to a Wellbrooke loop but the location it is in will soon be 80 new
homes so time to look elsewhere.  Current plan is a small number (maybe
three) BOG antennas switched by a remote relay but distance is limited to
200ft maximum in any direction.

Plan is to use the BOGs for 160 but also 80,40 and maybe 30m.

Regards

Paul MM0ZBH
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector


_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>