A nice Jennings 24V vacuum relay arrived in the mail today but I am not
sure the best way to detune my cage fed tower on 160. Would shorting the
cage to ground be the way?
Herb, KV4FZ
On Fri, Mar 22, 2019 at 3:59 PM FZ Bruce <k1fz@twc.com> wrote:
> RF parts was out of the VHC1 12V vacuum relays.. Tried the VHC3- 12V
> vacuum relay and found it to be an excellent replacement.. When first
> received tested pulling with a 9 volt battery and it was fast. Very
> dependable with 12 volts DC.
> 73Bruce
> https://www.qsl.net/k1fz/beverage_antenna.html
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|