Topband
[Top] [All Lists]

Re: Topband: Three Port Rx antenna splitter

To: topband@contesting.com
Subject: Re: Topband: Three Port Rx antenna splitter
From: Eric NO3M <no3m@no3m.net>
Reply-to: no3m@no3m.net
Date: Mon, 24 Dec 2018 14:45:50 -0500
List-post: <mailto:topband@contesting.com>
Corrected the autotransformer turns/tap on the 2-way splitter examples...

http://no3m.net/wp-content/uploads/2018/12/splitters.png

On 12/24/18 1:57 PM, Eric NO3M wrote:
Frank

If you really want a 3-port splitter, see here:

http://no3m.net/wp-content/uploads/2018/12/splitter-3.png

Two more common alternatives using 2-port splitters:

http://no3m.net/wp-content/uploads/2018/12/splitters.png

73 Eric NO3M


On 12/24/18 8:00 AM, Frank VO1HP wrote:
Does anyone have a schematic for a 75ohm three port splitter using #73
binocular cores.   I have those on hand.   Need to feed beverage to two
TS590SG’s and Skimmer SDR in CQWW160.

73 Frank VO1HP

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>