I would echo the comments about running an RG-6 feedline across a radial
field. I picked up huge amounts of common mode noise that got into
everything. (even other beverage wires!) I had to move the feedline to
cure it. Ferrites were not effective by simply decoupling each end of
the feedline.
Dave K1WHS
On 12/22/2018 8:10 PM, Mike Waters wrote:
Well-written, Bruce! :-)
73, Mike
www.w0btu.com
On Sat, Dec 22, 2018, 12:14 PM F Z_Bruce <k1fz@myfairpoint.net> wrote:
https://www.qsl.net/k1fz/beverage_antenna.html
73
Bruce-k1fz
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|