To: | <topband@contesting.com> |
---|---|
Subject: | Topband: K9AY Box, 6 pin din Pin-out |
From: | "Bill Gillenwater" <k3sv@pa.net> |
Date: | Fri, 7 Dec 2018 16:47:27 -0500 |
List-post: | <mailto:topband@contesting.com> |
I have acquired the AYtechnologies K9AY system boxes. This is a used unit but in excellent shape. The 6 pin din plug on the back of the control box is not numbered. Is the pin-out standard? 5 pins with a center pin above the connector "key" notch. Don't want to hook this up backwards, hi. I'm assuming the center pin is the 6 pin and the 1-5 either go counter or clockwise. Thanks 73 Bill K3SV _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Fwd: Re: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems), Mike Waters |
---|---|
Next by Date: | Re: Topband: Rather use N-type (was Re: The answer to PL-259, Steve Maki |
Previous by Thread: | Topband: Fwd: Re: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems), F Z_Bruce |
Next by Thread: | Re: Topband: K9AY Box, 6 pin din Pin-out, Joe Subich, W4TV |
Indexes: | [Date] [Thread] [Top] [All Lists] |