To: | James Lee <jlee.nk7b@gmail.com>, topband@contesting.com |
---|---|
Subject: | Re: Topband: Pasternack PL259 |
From: | MICHAEL ST ANGELO <mstangelo@comcast.net> |
Reply-to: | MICHAEL ST ANGELO <mstangelo@comcast.net> |
Date: | Wed, 5 Dec 2018 19:30:03 -0500 (EST) |
List-post: | <mailto:topband@contesting.com> |
I believe the connector produced in China have threading problems. Mike N2MS > On December 5, 2018 at 4:52 PM James Lee <jlee.nk7b@gmail.com> wrote: > > > The Pasternack offerings are pretty expensive, especially given that no > silver is present! They are listed at about 11 bucks each unless I misread > the data; I will try a couple of them with RG213. > > Sad to hear ths rumour that there may be a threading problem when using these > and attaching to amps or rigs? > > > Jiim > NK7B > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband Reflector _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Topband: The answer to PL-259 soldering/reliability problems, Steve Ireland |
---|---|
Next by Date: | Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems), Greg-zl3ix |
Previous by Thread: | Re: Topband: Pasternack PL259, Bill Cromwell |
Next by Thread: | Re: Topband: Pasternack PL259, Peter Bertini |
Indexes: | [Date] [Thread] [Top] [All Lists] |