Hi Dick,
This looks like a pretty go launcher for putting lines over trees. I've only
seen them while watching some youtube videos of the tree cutting/pruning
arborist and never knew where to buy them. Checking out the site I requested a
catalog but am a bit turned off by the high prices. My air canon does a pretty
good job but I suspect the one you show could be more accurate with it's
direction control. Thanks for the post, I'm sure others will be interested too.
Terry
KI7M
> On November 29, 2018 at 10:46 AM Dick Bingham <dick.bingham@gmail.com> wrote:
>
>
> I use a "Big Shot" arborist slingshot to install my wire antennas from tall
> Fir and Cottonwood trees.
>
> Check it out here ===>
> *https://www.sherrilltree.com/sherrilltree-big-shot-standard-kit
> <https://www.sherrilltree.com/sherrilltree-big-shot-standard-kit>*
>
> You can launch a 3/4-inch pipe elbow over 100+foot high trees with height
> to spare.
> This is not a wimpy-ass system and can hurl some strong messenger-line
> twine
> over the trees with ease even during serious winds.
>
> Use an open-face style spool/roll of messenger line that allows the line to
> 'pay-out'
> off the end of the spool, or like a spin fish-casting reel, without having
> to reel-off by spinning the spool. I usually stab a rod into the ground so
> it points toward the selected tree and insert the roll of twine onto the
> rod so the line can be launched
> with minimal off-axis drag.
>
> Painting the pipe-elbow/whatever *International-Orange* saves LOTS of
> search time when using nearly invisible fishing line and you are working
> alone!
>
> 73 Dick/w7wkr
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|