Topband
[Top] [All Lists]

Re: Topband: TX5T will be QRV on the Low Bands from the Australs !

To: terry burge <ki7m@comcast.net>
Subject: Re: Topband: TX5T will be QRV on the Low Bands from the Australs !
From: Cecil Acuff <chacuff@cableone.net>
Date: Sat, 4 Aug 2018 09:07:01 -0500
List-post: <mailto:topband@contesting.com>
I think you are confused Terry.

Web site clearly states operation on 160-6 SSB, CW and digital modes.

http://australs2018.com/frequency-plan.html

Cecil
K5DL

Sent using recycled electrons.

> On Aug 4, 2018, at 3:30 AM, terry burge <ki7m@comcast.net> wrote:
> 
> Another DXpedition in the Pacific we could work on SSB but they won't take 
> the time to work phone, ONLY CW and FT8. Whoever came up with the bright idea 
> of no SSB? 
> 
> Terry
> KI7M
> 
>> On August 3, 2018 at 12:21 PM Bob Allphin <k4uee@comcast.net> wrote:
>> 
>> 
>> Low Band enthusiasts.....
>>       The 5 man team going to TX5T, Raivavae Island in the Austral group
>> are pleased to announce that they will be QRV on all bands 160m thru 10m.
>> (no permit for 60M).  We should arrive August 13th and depart the 22nd.
>>       The decision has been made to use 18m Spider poles to support a 160m
>> Tee and an 1/4 vertical on 80m.  Power output will be limited to 500w. 
>> There are
>> plans for receive antennas as well.
>>       On TopBand, our frequency allotment begins at 1830 KHz, so look for
>> us just above that and likely listening up most of the time, but down for
>> our friends in JA.  We also expect to be QRV on FT8 around 1838-1840.
>>         Check out our website for additional information: 
>> http://www.australs2018.com/
>> 73,
>> The 2018 TX5T team
>> (W5MJ, W5RF, W5SJ, K5PI AND K4UEE)
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> _________________
>> Topband Reflector Archives - http://www.contesting.com/_topband
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>