Topband
[Top] [All Lists]

Re: Topband: Beverage selector switch via IP

To: ''''''topband List'''''' <topband@contesting.com>
Subject: Re: Topband: Beverage selector switch via IP
From: MR TREVOR DUNNE <ei2glb@eircom.net>
Date: Tue, 10 Jul 2018 20:30:36 +0100 (IST)
List-post: <mailto:topband@contesting.com>
Can you give so more info on how the PST software works/connects to the board, 
I use it to turn my rotator but have never seen any option to control anything 
else in it,

Thanks
Trevor
EI2GLB
----- Original Message -----
From: VE6WZ_Steve <ve6wz@shaw.ca>
To: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Cc: TopBand List <topband@contesting.com>
Sent: Tue, 10 Jul 2018 14:56:36 +0100 (IST)
Subject: Re: Topband: Beverage selector switch via IP

Like RA0FF I use the Denkovi 8 relay USB board together with the PST rotor 
control software that provides a standard rotor control interface. Point and 
shoot at the direction with the mouse to select the direction. The PST rotor 
software includes software to communicate with the Denkovi boards as well as 
others. I use two of these at the remote station for selecting both Beverage 
and the 9 circle directions.
I have a video of my set-up here: https://www.youtube.com/watch?v=zFC4Nfa8o_w 
<https://www.youtube.com/watch?v=zFC4Nfa8o_w>

de steve ve6wz.


> On Jul 9, 2018, at 5:22 PM, Herbert Schoenbohm <herbert.schoenbohm@gmail.com> 
> wrote:
> 
> Looked all over for one of these so my Beverages could be selected remotely
> via an IP address.  Is there such a device marketed anywhere?
> 
> Herb, KV4FZ
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>