To: | topband@contesting.com |
---|---|
Subject: | Re: Topband: Adding chicken wire or mesh on top of radial field |
From: | Rob Atkinson <ranchorobbo@gmail.com> |
Date: | Tue, 5 Jun 2018 08:08:52 -0500 |
List-post: | <mailto:topband@contesting.com> |
for permanent installation it's a waste of time because thin wire steel mesh (chicken fence mesh) will rust away in most ground in a short time. Recommend copper mesh but professionally it only seems to be employed around the base pier of voltage fed towers. For a current fed tower a lot of radials near the feed point, >= 90, is good enough. 73 Rob K5UJ _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Adding chicken wire or mesh on top of radial field, n4is |
---|---|
Next by Date: | Re: Topband: Adding chicken wire or mesh on top of radial field, Grant Saviers |
Previous by Thread: | Topband: Adding chicken wire or mesh on top of radial field, Craig Clark |
Next by Thread: | Re: Topband: Adding chicken wire or mesh on top of radial field, Charles Moizeau |
Indexes: | [Date] [Thread] [Top] [All Lists] |