Topband
[Top] [All Lists]

Re: Topband: Straws in the Wind ....A 160m Dx'ing Sea Change is Upon us!

To: "k1zm@aol.com" <k1zm@aol.com>, 'TopBand' <topband@contesting.com>
Subject: Re: Topband: Straws in the Wind ....A 160m Dx'ing Sea Change is Upon us!
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Fri, 30 Mar 2018 10:24:32 -0700
List-post: <mailto:topband@contesting.com>
FYI,

This was posted yesterday by K1JT to the WSJT email reflector.

73, Jim K9YC

Everyone paying attention should already know what's contained in this message -- but it's clear that some do not.

The current General Availability (GA) release of WSJT-X is v1.8.0.  That program version does not include FT8 DXpedition Mode.

We have made beta-level "release candidates" available for the explicit purpose of testing FT8 DXpedition Mode.  The release candidates have included cautionary warnings to the effect that in its present form, DXpedition Mode should be used only for controlled testing.

A few operators or groups have ignored our warnings and tried to use FT8 DXpedition Mode in true pileup situations.  The consequences are predictably bad -- especially when the offending operator(s) have chosen their frequencies badly and other operators are using a mix of program versions including v1.8.0, v1.9.0-rc2, v1.9.0-rc3, some version of JTDX.

FT8 DXpedition Mode is not yet ready for “production” use. Until WSJT-X v1.9.0 is fully released -- not a beta-level "release candidate", but a full General Availability release -- DXpedition Mode should be used only in controlled test situations.

The next public test of FT8 DXpedition Mode conducted by the WSJT Development Group will be conducted on April 7, a little over a week from now.  You are cordially invited to join us for this test.  See the announcement posted here yesterday (Subject: WSJT-X v1.9.0-rc3: Testing of FT8 DXpedition Mode) for details.

    -- 73, Joe, K1JT

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-develOn 3/30/2018 4:50 AM, k1zm--- via Topband wrote:
Hello Gang
I am probably not the only one who has been paying attention lately, but I may 
be the first to comment directly on what has been taking place right before our 
eyes the past two nights on 1.836kHz - and its possible implications going 
forward for future Dx'ing on 160m. Pls read on.
I am sure most readers of these pages are well aware of the current dx'pedition to Malawi operating as 7Q7EI.  Norbert DJ7JC has been a real trooper working the lowbands and has had quite a bit of success doing so - so well deserved kudos & thanks to Norbert.  Norbert has managed to make quite a few NA stations happy with a NEW ONE on Topband and we all very much appreciate his efforts - well done Norbert - thank you! So what I am about to comment on next IN NO WAY is an negative opinion on Norbert - it is just an observation as to what is now occurring and its possible implications for all of us who like to work DX on 160M!. On or about 27 March, Norbert tried 160M CW operating on 1830kHz - in his grayline period - and was heard by a number of stations including NO3M and me here at VY2ZM.  Others were in there too perhaps - Kaz K8KS may have been another and a few more as well.  I also heard some EU stations in there calling among the NA stations. About 0228z, Norbert asnwered me as UY2ZM - went QRZ a few times but QRNN on his side prevented a legitimate qso.  I heard him fine but I know he did not copy my callsign correctly - and later he even said so over ON4KST noting "I heard a few callers, mainly from EU but logged no NA or EU qso's on Topband - so I went back to 80M CW as the sun came up." The next night Norbert came on ON4KST  chat and announced that he was going to try 1836 using the new FT8 Dx'pedition mode now in beta trials following its release by K1JT.  I am told that the dx'pedition version of FT8 will also be used experimentally by the upcoming KH1 Dx'pedition. Dx'pedition Mode - offers some unique promise when and if it ever is fully conceived including: 1) A shortened qso sequence using only 2 of the traditional FT8 required QSO elements
2) The promise of simultaneous qso's between Multiple HOUNDS and the FOX (in 
this example the FOX was 7Q7EI)
3) The potential, as a result, of up to 300-400 qso's per hour may be possible 
one day - which would improve the overall qso totals of any dx'pedition - IF 
this ever becomes REALITY.
So on night two Norbert came up on FT8 dx'pedition mode - first on 80m and I managed to work him fairly quickly here at VY2ZM. Others worked him as well - as we all struggled to learn exactly how to operate this new flavor of FT8.  It is a bit tricky and I invite anyone reading this who may be interested to take a look - because Dx'pedition mode uses special settings within WSJT-x - and one must configure things exactly right - or it just does not function as one might expect traditional FT8 to function in order to complete qso's. Nearer to his SR, Norbert went to 1836 and I think he may have worked a couple of NA stations - I tried but without success because I did not pay close enough attention to ON4KST - and I came to 160m too late in the game to have a good shot as he went into daylight on his side. So what is going on here exactly?  And why did I choose to make this post to Topband? The answer is fairly simple and stems from what I observed this past summer on 6M during the Sporadic E season.  I happen to like to work 6M E during the summer and was all set around the end of June for what I hoped would be a great E season on 6M CW into Europe.  I worked a couple of stations on CW in late June but during the first or second week of July, K1JT released the production version of FT8 and almost immediately everyone realized its potential (particularly those in the Mid and Far Western USA) - where it was immediately called a "GAME CHANGER" by K7JA and others on the Left Coast.


Well - it SURELY WAS A GAME CHANGER - because I did not hear a single CW DX station 
out of Europe on 6M for the rest of the summer E season after that - everyone had 
qsy'ed to 50.313 to work FT8 - because it WORKED so well on 6M - even on E skip 
paths.  And since I did not have FT8 capability - I was TOTALLY SHUT OUT and 
had NO 6M E season of Dx'ing - BUMMER!


So how does this apply to Topband?  Pls read on.....


Last night was NIGHT 3 into NA on the lowbands from 7Q7EI - and Norbert was back - 
first on 160m on 1836 from about 0130z - until around 0320z - again on FT8 - in 
dx'pedition mode.  By now, most of us had downloaded the dx'pedition mode 
version of WSJT-x and had sort of figured out how to do the parameter settings 
correctly - so quite a few QSO's ensued.


I happened to be one of the lucky ones on 160M - there were quite a few others.


Watching my screen though (along with KAZ K8KS) it was clear that K1JT still has 
some clean up work to do to refine the dx'pedition mode software - because the 
promise of 300 qso's per hour is not yet possible - but I think the throughput rate 
will one day improve materially.  (:Last night the throughput was SO SLOW that 
some suggested to Norbert that he stop using dx'pedition mode in favor of the more 
reliable current release of FT8 that is on the air today.)


Norbert also elected to stay on FT8 - despite many requests from those constrained by CW only capability to 
move over to CW mode - so those without FT8 basically sat on the sidelines last night watching all of this 
transpire.  My thoughts at the time were - "Here we go again!  This is 6M E season "DEJA 
VUE all over again - the 6M E migration to Ft8 was now happening all over again - but this time on 160M - and 
it suggests a real possibility of it becoming the choice of major dxpeditions going forward - meaning - FT8 
is likely to be used on 160m far more regularly going forward and  CW mode utilized much less perhaps 
(maybe!).  My crystal ball is no better than yours - but if FT8 dx'pedition mode gets perfected by K1JT 
and becomes more EFFICIENT one day than CW mode - you can be SURE that it will become very popular and it 
will get used far more (at the expense of CW) by the rarer Dx'peditions when they choose to QSY to Topband!


You can take that to the BANK!
At one point, Norbert who was on CHAT all night long - lamented some of the comments he was seeing by others on CHAT.  Basically, while he was more than courteous, it was clear that he felt like "HEY!  I am the FOX here.....I get to choose to operate whatever mode I think will work - and those sitting in their comfortable chairs back at home (and not sitting in the heat here on the shores of Lake Malawi - really do not get to decide this.!!  Again, I am the FOX here.......)  Basically, Norbert was right on here - IMHO.... Some more observations: 1) Experimental FT8 qso's are not completing reliably as they should - at least not yet all the time - for example:  K8KZ was clearly seeing 7Q7EI calling him on his screen for at least 20 mins before the software linked up at  each end to sent the RR73 message - the signal that the QSO was complete. And Norbert was clearly "seeing" K8KS for the same 20 mins - before they linked up to finalize and log the QSO.  I had similar problems on 160M when working Norbert - so it is clear that K1JT has some more work to do,. But, we do have to realize that this is still only a BETA/experimental release - and YES - it does have some glitches and bugs yet to be ironed out. But it does work (after a fashion) and I am sure it will get better - and WHEN IT DOES become a fully functional PRODUCTION RELEASE, I do think we will witness some MAJOR operating changes going forward when working future DX'peditions and even when casual dx'ing on 160M - which is happening every night on 1840 today.  I am seeing Wal W8LRL most every night - and am dabbling in it myself as is my XYL Miriam VY2HH - so old dawgs (like me) are being forced (sometimes kicking and screaming) to learn new tricks. One final comment: This all took place on 1836 and I think on 3569 down on 80m these past few nights.  Traditional FT8 (according to the ARRL 160m bandplan) takes place on 1840.  So I am hopeful that the migration to the new mode continues to take place in an orderly fashion because FT8 and CW really will not mix well - should FT8 start showing up below 1830 that will cause problems  - (just my opinion) - but reality I think. So - I think that is the lot for now.  Not much more to report - but for sure - "A change is coming to Dx'ing on 160M - there is NO DOUBT about it - I do not think this is a passing FAD.  "DIGI-WIGI" or its other name "JINGLE BELLS" looks like it is here to stay!!! 73 JEFF  K1ZM/VY2ZM

Jeff Briggs
DXing on the Edge: The Thrill of 160 Meters
Available worldwide through BookBaby, Array Solutions, DX Engineering, Royal Society of 
Great Britain, & Amazon
_________________
Topband Reflector Archives - http://www.contesting.com/_topband


_________________
Topband Reflector Archives - http://www.contesting.com/_topband
<Prev in Thread] Current Thread [Next in Thread>