Sadly I have to tell you that a brilliant light that was Price has been dimmed.
He is a silent key now. He will be missed.XYL Inge
From: David Harmon <k6xyz@sbcglobal.net>
To: 'HP' <pfizenmayer@q.com>; 'Mike Waters' <mikewate@gmail.com>
Cc: 'topband' <topband@contesting.com>
Sent: Thursday, October 5, 2017 11:07 PM
Subject: Re: Topband: - Belden Snap n Seal
Yep....me too.
I got everything at Lowes.....tools and all.
One small thing.....
The correct part number is SNS1P6U-50R.
The writing is small and Hank had a 5 in place of the second S.
Also...the color of the connector indicates what coax is supposed to be
used.
Red is the correct color in this case.
There is a chart on the Belden site indicating the color vs coax etc.....
As I remember....the box of 50 was about $26
73
David Harmon
K6XYZ
Sperry, OK
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of HP
Sent: Thursday, October 5, 2017 5:09 PM
To: Mike Waters <mikewate@gmail.com>
Cc: topband <topband@contesting.com>
Subject: Re: Topband: - Belden Snap n Seal
I bought a box of 50 Belden Snap N Seal - the box says RG-6/6QS which I
assumed meant it was ok for both but have never used it on anything but
regular RG6 - I have the Belden Tool which I bought at same time. - part
number of the connector is SN51P6U-50R It was at LOWES and was much less
than ordering from a ham supplier . I cant find my receipt but remember it
beat u know who by a LOT. 73 Hank K7HP _________________ Topband Reflector
Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|