Topband: RX/TX Antenna decoupling,

[MR TREVOR DUNNE <ei2glb@eircom.net>]

Hi All

I want to make sure my tx antenna doesn't upset my RX antenna they are about 
20m apart,

I plan to disconnect the feed line to the TX antenna when in RX but do I leave 
it floating or ground it,

I will be using a shut capacitor to match the antenna so it will be grounded 
will this cause issues,


Also I will have a 80m wire vertical spaced a few feet from the 160 vertical, 
will grounding this when I'm on 160 stop any interaction or do I let it float,

Again if I use shunt capacitance to match this am I opening my self up for 
issues,


Thanks
Trevor
EI2GLB
_________________
Topband Reflector Archives - http://www.contesting.com/_topband