I use these on my dummy loads.
Keep in mind that they need to be mounted on a heat sink and because of the
small size they don't handle surges like their larger brothers.
If there is a change of lightning strikes nearly you may want to parallel
multiple units.
Mike n2MS
>
> On January 27, 2017 at 12:35 PM "jcjacobsen@q.com" <jcjacobsen@q.com>
> wrote:
>
> I was looking for some non-inductive resistors for experimenting with
> antennas.
>
> This list is AMAZING!! Thanks for the replies, but it looks like Grant,
> KZ1W, has pointed me in the correct direction.
>
> <snip> Check out the Ohmite non-inductive 100w series
> http://www.ohmite.com/cat/acl_ap101.pdf
> Digikey stocks some values.
>
> Grant KZ1W
>
> <snip>
>
> Thanks to Grant and to all on the list.
> 73 K9WN Jake
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|