Topband
[Top] [All Lists]

Re: Topband: Stew Report

To: topband@contesting.com
Subject: Re: Topband: Stew Report
From: W0MU Mike Fatchett <w0mu@w0mu.com>
Date: Sun, 18 Dec 2016 21:43:24 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
I don't think I was one of those as I never went over 29 wpm says mr. computer! HI! I would slow down though and space out the characters and really slowed down if they were light or having trouble.

There were a bunch of ops blazing along.

I loved asking for NR or grid and getting back my call and the grid once and getting my entire call and losing the grid in the QSB.

My big dx was NP2X calling me and KV4FZ. I heard a few chirps out of EU The joys of being in Colorado.

W0MU


On 12/18/2016 6:38 PM, lstoskopf@cox.net wrote:
I was playing on 160 back in the late 1950s with and S40B RX and a much 
modified ARC5 TX from our farm in Central KS as W0PSF.  Would work about 130 Qs 
in the CQ contest.  Took advantage of a trip to Boston to visit Stew in his 
attic shack and got to hit the key on his spark rig.  Life and work got in the 
way and my CW skills went way down (from the straight key level!).  Now at age 
77 I saw the notice for the Stew.

When we built my house I put in a large office/hamshack on the 2nd floor and 
totally covered the walls with aluminum foil and lots of spare wire all 
anchored in three places to ground.  Not sure why.  Anyway, I have some cables 
going to the tower base so lifted one, tied a 120 ft wire to it up to the flag 
pole and down again.  Checked the SWR against the screen in the room with the 
SARK-100.  Close.  Tied the Omni VII and loaded.  Couldn't run more than 20 
watts or dumped the computer monitors.  Off to a Christmasconcert.

Back to the contest.  Found out the Bencher key didn't work.  Contacts 
corroded.  Fixed that.  Gave a call to a loud sig running about 25 wpm.  Right 
back, but the report at 30wpm.  Now was that a R?  No an EM, by then I'd 
forgotten the #.  Either age or lack of practice, that was beyond my 
comprehension.  Sent a ? and my grid report.  Got an R back and away he went.  
Oh well, I got the grid from his next QSO.  So I slowed my keyer  way down to 
12 wpm.  Next guy slowed and OK.  Then back to the fast guys.  I'd call and 
they were back at way too fast for me.  Worked both coasts with 20 watts, but 
waiting for some of those guys calling CQ over and over at 30 wpm... and no 
replies...so I could fill their report was a pain.  So I stopped calling the 
fast and loud guys.  After 31 contacts in 2 hours decided this wasn't much fun 
so off to bed.

Kind of frustrating.  This morning I came up with a plan.  I'm not going to win 
anything anyway so:  If I'm around next year I'm going to put up the Titanex, 
now resting in the shed, get the the Orion and ACOM 2000 set.  Run the contest 
and not bother with copying the reports.  Will just send in a check log.  Won't 
sweat the...was that an EM or W, and EN or R, etc.  Will have a good time and 
get back to SSB.

Meanwhile I need to dig out the newsletters Stu used to send in red and black 
mimeo  with all of the personalized notes  as well as the SWL I got from him 
when he was on an European cruise....I guess it  was a bit of trouble to get a 
big tube type RX approved for use on the deck!  Thanks stu  for being the 
inspiration for all of the 160 activity...even if the CW has moved faster than 
my skills.  See you guys next year.

N0UU
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>