| To: | Carol Richards <n2mm@comcast.net> |
|---|---|
| Subject: | Re: Topband: RBOG Question |
| From: | Guy Olinger K2AV <k2av.guy@gmail.com> |
| Date: | Wed, 23 Nov 2016 17:19:35 -0500 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
No. 73, Guy K2AV On Wed, Nov 23, 2016 at 5:15 PM, Carol Richards <n2mm@comcast.net> wrote: > Hello all, > > I just finished laying out my 200 foot RBOG. Is the terminating resistor > critical. I used a 200 ohm instead of 240 ohm resistor. Will it make any > difference? > > > Carol > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband > _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Topband: RBOG Question, Carol Richards |
|---|---|
| Next by Date: | Re: Topband: A big thank you to those participating in the Fox Hunt event last night!!, Paul Stroud |
| Previous by Thread: | Topband: RBOG Question, Carol Richards |
| Next by Thread: | Topband: RBOG - wire fence, Roger Parsons via Topband |
| Indexes: | [Date] [Thread] [Top] [All Lists] |