I took a hint from Luis HC1PF. A small 1.8+/- clock oscillator and a wire
attached to a pole is what he used.
I found said oscillator on eBay.
It worked, but I am not sure the near field results should be taken for
granted.
73
Art NK8X
p.s. Still trying to figure out the computer problem that plagued me during
the SP, and is gone now!
On Sun, Oct 23, 2016 at 12:53 PM, Bob K6UJ <k6uj@pacbell.net> wrote:
> How do you plot the directivity of your BOG ?
> I am toying with the idea of either transmitting from my car HF rig
> (milliwatt sig)
> and plotting the pattern from diff directions or is it possible to
> transmit with the BOG with
> a real low milliwatt sig ? I was thinking then I could drive around with
> my HF rig in the car
> in about a half mile radius and see if I could plot the pattern. This
> might not be doable,
> but thought I would throw it out there.
> How do you test your BOG ?
>
> Bob
> K6UJ
>
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|