Re: Topband: Looking for 160m narrow beam RX advice - an interesting com

[Herbert Schoenbohm <herbs@vitelcom.net>]

The 1026 has a built in pre-amp which may be helpful.  The built in 
antenna is easily removed by just unscrewing it from the feed through, 
or not putting it on in the first place when you open the box.

Herb, KV4FZ

On 1/15/2015 1:20 AM, Mike Waters wrote:
> I meant to say MFJ-1025, not 1026. The 1026 has a built-in sense antenna
> sticking out of the cover, IIRC. What is really needed --unless the noise
> is right in your shack-- is a separate antenna that picks up the unwanted
> noise MUCH better than the one built-in to the 1026.
>
> 73, Mike
> www.w0btu.com
>
> On Mon, Jan 12, 2015 at 11:39 AM, Rob Atkinson <ranchorobbo@gmail.com>
> wrote:
>
> > ...  to just get an additional MFJ-1026 to effectively null the second
> > noise source?
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband