Trevor,
For 160m I have a 75ft irrigation pipe vertical (4 & 3 inch pipe) with two
50ft top hat wires wires. For 80m I run a #10, 65ft wire with 12 inch
homebrew fiberglass stand offs up the side of the irrigation pipe. At the
base, I have two separate matching devices that I manually change to
operate either band. I will automate this soon. This way, This way, I can
share the same radial field. I do have to ground the irrigation vertical to
operate on 80m.
Works great for me!
Ray,
N6VR
On Sun, Dec 28, 2014 at 5:39 PM, MR TREVOR DUNNE <ei2glb@eircom.net> wrote:
> Hi All
>
> I need some help in trying to get an antenna that will cover both 80 and
> 160,
>
> What I was planning is a Inverted L with a 75 ft Vertical section of
> Aluminum tube and the rest tied off to a convenient tree, what I would like
> to add is a 80m vertical wire spaced off the main aluminum element of the L,
>
> Would this work and what sort of spacing would I need, could I feed both
> on the same feedline ???
>
> Thanks
> Trevor
> EI2GLB
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|