Hi Tim
This are the same relay used in the DXE TFS4 4SQ systems?
73,
Jorge
CX6VM/CW5W
-----Mensaje original-----
De: Topband [mailto:topband-bounces@contesting.com] En nombre de Tim Duffy
Enviado el: jueves, 09 de octubre de 2014 12:27 a.m.
Para: 'Milt -- N5IA'; topband@contesting.com
Asunto: Re: Topband: TX relays
Hello Milt:
I have used these relays in my TX arrays for almost 30 years.
No failures so far.
http://www.dxengineering.com/search/product-line/comtek-four-square-hybrid-r
eplacement-relays?tw=relay&sw=COMTEK%20Four-Square%20Hybrid%20Replacement%20
Relays
Yes, I work at DX Engineering - and yes I stand behind (and use this stuff
at K3LR) what we sell.
73,
Tim K3LR
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Milt --
N5IA
Sent: Wednesday, October 08, 2014 9:39 PM
To: topband@contesting.com
Subject: Topband: TX relays
What make and model of DPDT relays are you using in your TX arrays?
What are your sources?
I am looking for some 12 VDC units that are capable of handling full legal
limit power to install in a controller for a multi-element directive array.
Thanks in advance for any and all suggestions.
73 de Milt, N5IA
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4040/8351 - Release Date: 10/08/14
_________________ Topband Reflector Archives -
http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
---
Este mensaje no contiene virus ni malware porque la protección de avast!
Antivirus está activa.
http://www.avast.com
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|