To: | 'TopBand' <topband@contesting.com> |
---|---|
Subject: | Re: Topband: 160 GP Choke |
From: | Jim Brown <jim@audiosystemsgroup.com> |
Reply-to: | jim@audiosystemsgroup.com |
Date: | Tue, 30 Sep 2014 09:44:20 -0700 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
No. I wrote badly. Measure out two 5 feet lengths of enameled wire.
Tape them together (a single wrap of tape every 5 inches or so) and wind
that pair of wires 16 turns around a single core. Connect it at each end
as a two-wire transmission line.
73, Jim K9YC On Tue,9/30/2014 3:42 AM, Mark van Wijk wrote: Using 2x4 pcs FT240-31 it might look something like this: https://www.flickr.com/photos/pa5mw/7870640836/in/set-72157640001358005 _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: [Bulk] Re: 160 GP Choke, Tim Shoppa |
---|---|
Next by Date: | Re: Topband: [Bulk] Re: 160 GP Choke, Jim Brown |
Previous by Thread: | Re: Topband: 160 GP Choke, Jim Brown |
Next by Thread: | Re: Topband: 160 GP Choke, Dan Maguire via Topband |
Indexes: | [Date] [Thread] [Top] [All Lists] |