Topband
[Top] [All Lists]

Re: Topband: 2 wire Beverage question

To: Carl <km1h@jeremy.mv.com>, topband <topband@contesting.com>
Subject: Re: Topband: 2 wire Beverage question
From: Mike Waters <mikewate@gmail.com>
Date: Fri, 4 Oct 2013 10:41:06 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Carl,

It sounds like you are asking if transposing the two Beverage antenna wires
at either end will make a difference. It will not.

For a single, bi-directional Beverage or BOG, phasing does not matter. Are
you going to phase two parallel BOGs together?

73, Mike
www.w0btu.com

On Thu, Oct 3, 2013 at 8:13 PM, Carl <km1h@jeremy.mv.com> wrote:

> I want to install another 2 wire BOG and experiment with different lengths
> and at the same time use up some extra lengths of MIL telephone wire.
>
> When wiring the sections in series do I have to maintain phase or isnt it
> relevant? IOW, does the wire leaving one side of the feedline end
> transformer have to be connected to the same end at the reflection
> transformer?
>
> Carl
> KM1H
>
_________________
Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>