When time permits, Charlie, I will do just that! Almost done with everything
up to the two boxes with the switchable components - resistor, xfmr - as I
await the xfmr(s) arrival. Outta be listening by Sunday morning!!
> From: charlie-cunningham@nc.rr.com
> To: rodenkirch_llc@msn.com; mikewate@gmail.com; topband@contesting.com
> Subject: RE: Topband: Two 2:1 transformers to choose from!!
> Date: Thu, 22 Aug 2013 14:41:40 -0400
>
> Well, Jim
>
> Since you wound both transformers, why not try them both, and see if you
> can measure any difference? I' guessing you won't see much!
>
> 73,
> Charlie, K4OTV
>
> -----Original Message-----
> From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of James
> Rodenkirch
> Sent: Thursday, August 22, 2013 2:00 PM
> To: Mike Waters; topband
> Subject: Re: Topband: Two 2:1 transformers to choose from!!
>
> Thanks, Mike - will try the 2:3 ratio one first!
>
> > Date: Thu, 22 Aug 2013 10:21:14 -0500
> > From: mikewate@gmail.com
> > To: rodenkirch_llc@msn.com; topband@contesting.com
> > Subject: Re: Topband: Two 2:1 transformers to choose from!!
> >
> > P. 7-69 of Low Band Dxing (5th ed.) by ON4UN says a maximum of 4 turns on
> > the low-Z primary for binocular cores. It might work, but there are other
> > turns ratios you might try.
> >
> > Here is a list of turns ratios for those cores I made:
> > http://www.w0btu.com/Binocular_core_turns_ratios.pdf
> > If you get a 500 Server Error message, contact me directly and I'll e-mail
> > it to you.
> >
> > 73, Mike
> > www.w0btu.com
> >
> > On Wed, Aug 21, 2013 at 3:49 PM, James Rodenkirch
> <rodenkirch_llc@msn.com>wrote:
> >
> > > I received enuff "info" and thoughts to know I'll utilize the 5:7
> winding
> > > version.
> > >
> > _________________
> > Topband Reflector
>
> _________________
> Topband Reflector
>
_________________
Topband Reflector
|