| To: | <topband@contesting.com> |
|---|---|
| Subject: | Topband: PHASING SHUNT FED TOWERS |
| From: | "Mike Greenway" <K4PI@BELLSOUTH.NET> |
| Date: | Thu, 30 May 2013 18:03:53 -0400 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
I did try it with two shunt fed towers on 160 meters 1/4 apart using a Wilkinson power divider and had little success and then read in ON4UN’s Lowband book that phasing shunt fed tower was very difficult if possible at all. You might take a look at his book and see if those comments are still there. 73 Mike K4PI All good topband ops know how to put up a beverage at night. _________________ Topband Reflector |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: Shunt fed tower plus Marconi vertical phasing on 160 and80?, Lennart M |
|---|---|
| Next by Date: | Re: Topband: PHASING SHUNT FED TOWERS, Tom W8JI |
| Previous by Thread: | Topband: Shunt fed tower plus Marconi vertical phasing on 160 and 80?, Paul Staupe |
| Next by Thread: | Re: Topband: PHASING SHUNT FED TOWERS, Tom W8JI |
| Indexes: | [Date] [Thread] [Top] [All Lists] |