Depends on the method used to provide the conductivity. If it's carbon
black filled, the shrinking is goin g to push the molecules of the carbon
black closer together and that results in a net decrease in volume
resistivity. It may not matter however, as carbon filled stuff is going to
be in the K-ohms range in the lowest case. Other fillers may have lower
values.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: Bruce
Sent: Tuesday, March 12, 2013 6:43 AM
To: topband@contesting.com
Subject: Re: Topband: Antenna terminations
Anyone else found a lowering of resistance after heat shrinking terminations
after cool down?
73
Bruce-K1FZ
You may have some of that somewhat conductive heat shrink tubing. Good idea
to check the glue for conductivity before use.
www.qsl.net/k1fz/beveragenotes.html
_________________
Topband Reflector
_________________
Topband Reflector
_________________
Topband Reflector
|