Topband
[Top] [All Lists]

Re: Topband: Inverted L

To: topband <topband@contesting.com>
Subject: Re: Topband: Inverted L
From: Mike Waters <mikewate@gmail.com>
Date: Tue, 29 Nov 2011 22:48:22 -0600
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On Tue, Nov 29, 2011 at 9:51 PM, Peter Voelpel <df3kv@t-online.de> wrote:

> Be careful with cheap tv cable. Some are just steel wire with a very thin
> copper layer ... on 160m you might run into too high losses.
>

Very true. But the 1000' rolls of Commscope RG-6 I bought cheaply off of
eBay had a sufficiently thick coating of copper.

CATV-type Commscope brand quad aluminum shield RG-6 is all I use here to
feed my antennas. The copper coating on the steel-cored center conductor is
thick enough to use even below 160 meters. At 1 MHz, it has just .25 to .38
dB/100 ft loss.

Here's the full specs for two types:
http://awapps.commscope.com/catalog/uniprise/product_details.aspx?id=25253
http://awapps.commscope.com/catalog/uniprise/product_details.aspx?id=34310

What is more, it has the same low loss and similar power handling
capabilities as RG-213/U. http://vk1od.net/transmissionline/RG6/

Why spend big bucks on name-brand copper coax?

73, Mike
www.w0btu.com
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>