All,
I agree with Bill and KD9SV is nothing more that what BIll is talking
about.
Just put the relays into the box and connect between radio and
preamp/ant > done.
73 - Petr, OK1RP
On Mon, 17 Oct 2011 19:49:29 -0400, "Bill and Liz McHugh" <magoo@isp.ca>
said:
> I suppose some people who use full break-in want a complicated
> solid-state front-end protector. I don't use break-in and so a simple
> DPDT relay powered from your transceiver will do the job at almost $0.
> One side grounds the auxilliary RX antenna port on the transceiver while
> the other grounds the RX antenna feedline. Foolproof, and you always
> know if it is working since you can hear the relay kick in every time you
> transmit.
>
> I have been using one of these for many years....ever since my linear
> developed a mind of its own when RF started feeding back into the
> transceiver's auxilliary RX port. I've never had a problem and it
> protects the front end 100%. 'Course I'm a dinosaur 'cuz I don't use
> full break-in.....but I suspect there are many like me!!
>
> Bill VE3NH/VE3CSK
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|