Topband
[Top] [All Lists]

Re: Topband: Pixel Technologies Magnetic RX Loop

To: "W2PM" <w2pm@aol.com>
Subject: Re: Topband: Pixel Technologies Magnetic RX Loop
From: "Andy Ikin" <andrew.ikin@btopenworld.com>
Date: Mon, 9 May 2011 21:31:37 +0100
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Pete W2PM wrote on the 9th May,

"I notice they repeat the incorrect assertion that these magnetic loops work 
by being sensitive to the "magnetic field" rather than the electric field 
and that has been long shown to be false - these antennas are not sensitive 
to the magnetic field at all but very close proximity to the sources."

Pete,

If what you say above is true; then how does one explain that I can achieve 
up to a 30dB reduction in local noise pick-up with a Wellbrook ALA1530 loop 
antenna compared to a Datong AD370 Active Dipole ( E -Field ) when the two 
antennas are a few metres away from 11kV powerlines. Both active antennas 
have a similar Antenna Factor to signals in the far field. Also if I use a 
Mobius loop with a similar gain as the ALA1530, I get the same noise 
reduction. Note: both loops were positioned not to null the noise.

If the loops were sensitive to the electic field then there would little 
difference in the noise reduction campared to the Active Dipole!

73

Andrew  G8LUG






_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>