Re: Using a BALUN on a "coax to unbalanced antenna", a UN-UN is preferred.
K3VW
In a message dated 3/7/2011 3:01:17 P.M. Eastern Standard Time,
topband-request@contesting.com writes:
Send Topband mailing list submissions to
topband@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/topband
or, via email, send a message with subject or body 'help' to
topband-request@contesting.com
You can reach the person managing the list at
topband-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Topband digest..."
Today's Topics:
1. Re: Preferred Choke Baluns (Tod - ID)
2. Re: Preferred Choke Baluns (Milt -- N5IA)
----------------------------------------------------------------------
Message: 1
Date: Sun, 6 Mar 2011 14:15:18 -0700
From: "Tod - ID" <tod@k0to.us>
Subject: Re: Topband: Preferred Choke Baluns
To: "'Charles Moizeau'" <w2sh@msn.com>, "'Topband'"
<topband@contesting.com>
Message-ID: <41FA0FDD41AD40CBA66A715067CFAC31@chem>
Content-Type: text/plain; charset="us-ascii"
Charles:
I make 160 meter RF Chokes [Choke Baluns] by running six turns of coax
through 5 cores of Fair Rite type 31 [2.4 in diameter cores]. Five turns
and
six cores will also work.
Tod, K0TO
-----Original Message-----
From: topband-bounces@contesting.com
[mailto:topband-bounces@contesting.com]
On Behalf Of Charles Moizeau
Sent: Friday, March 04, 2011 9:52 AM
To: Topband
Subject: Topband: Preferred Choke Baluns
I'd be grateful to learn the preferences of users of these devices.
My set-up is 50-Ohm, 0.405" diameter (Wireman X-4XL) coaxial cable,
underground, but within electrical pvc conduit. This attaches through a
PL-259 to a DX Engineering radial attachment plate. The antenna is an
inverted L with its base fed just through a variable capacitor (set for my
antenna at ~ 255 pF) .
I have given thought to chopping the PL-259, stringing a bunch of Palomar's
ferrite beads on the coax and then re-attaching the PL-259.
However, an alternative would be to insert a manufactured or home-brewed
balun, toroidal or solenoidal, between the radial attachment plate's SO-239
connector and the variable capacitor.
Physical space is not a problem because I've discovered that the DXE radial
attachment plate will fit nicely into a 12" x 12" x 6" heavy-duty gray
pvc
electrical box ($33 at Lowes). I plan to revise the existing and quite
messy above-ground set-up so that the radials will be inserted into the box
through tight-fitting and caulked notched holes in the four top edges, just
below where its cover will fasten, with their solder lugs attached to the
plate 180 degrees opposite from the conventional configuration. In this
way
the whole business can be buttoned up tightly and buried, with just the
antenna's attachment point and the capacitor's adjustment shaft sticking
up.
Perhaps this plan will be inspirational to others.
I'd prefer to see any choke balun recommendations posted to this list
rather
than sent directly, so as to share the "wealth".
Tnx es 73,
Charles, W2SH
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
------------------------------
Message: 2
Date: Sun, 6 Mar 2011 22:32:09 -0700
From: "Milt -- N5IA" <n5ia@zia-connection.com>
Subject: Re: Topband: Preferred Choke Baluns
To: "Tod - ID" <tod@k0to.us>, "'Charles Moizeau'" <w2sh@msn.com>,
"'Topband'" <topband@contesting.com>
Message-ID: <CE2C51BE70F04EDC862862297B03E554@MiltVostro2010>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
And I make all of my choke baluns for 160 Meter energy from 30 turns, 6"
in
diameter, of whatever cable it is. This is coaxial leads as well as rotor
cables, etc. Works like a champ.
Milt, N5IA
-----Original Message-----
From: Tod - ID
Sent: Sunday, March 06, 2011 2:15 PM
To: 'Charles Moizeau' ; 'Topband'
Subject: Re: Topband: Preferred Choke Baluns
Charles:
I make 160 meter RF Chokes [Choke Baluns] by running six turns of coax
through 5 cores of Fair Rite type 31 [2.4 in diameter cores]. Five turns
and
six cores will also work.
Tod, K0TO
-----Original Message-----
From: topband-bounces@contesting.com
[mailto:topband-bounces@contesting.com]
On Behalf Of Charles Moizeau
Sent: Friday, March 04, 2011 9:52 AM
To: Topband
Subject: Topband: Preferred Choke Baluns
I'd be grateful to learn the preferences of users of these devices.
My set-up is 50-Ohm, 0.405" diameter (Wireman X-4XL) coaxial cable,
underground, but within electrical pvc conduit. This attaches through a
PL-259 to a DX Engineering radial attachment plate. The antenna is an
inverted L with its base fed just through a variable capacitor (set for my
antenna at ~ 255 pF) .
I have given thought to chopping the PL-259, stringing a bunch of Palomar's
ferrite beads on the coax and then re-attaching the PL-259.
However, an alternative would be to insert a manufactured or home-brewed
balun, toroidal or solenoidal, between the radial attachment plate's SO-239
connector and the variable capacitor.
Physical space is not a problem because I've discovered that the DXE radial
attachment plate will fit nicely into a 12" x 12" x 6" heavy-duty gray
pvc
electrical box ($33 at Lowes). I plan to revise the existing and quite
messy above-ground set-up so that the radials will be inserted into the box
through tight-fitting and caulked notched holes in the four top edges, just
below where its cover will fasten, with their solder lugs attached to the
plate 180 degrees opposite from the conventional configuration. In this
way
the whole business can be buttoned up tightly and buried, with just the
antenna's attachment point and the capacitor's adjustment shaft sticking
up.
Perhaps this plan will be inspirational to others.
I'd prefer to see any choke balun recommendations posted to this list
rather
than sent directly, so as to share the "wealth".
Tnx es 73,
Charles, W2SH
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1435/3486 - Release Date: 03/06/11
------------------------------
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
End of Topband Digest, Vol 99, Issue 8
**************************************
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|