Topband
[Top] [All Lists]

Re: Topband: Do short beverages "work"?

To: <herbs@vitelcom.net>, <topband@contesting.com>
Subject: Re: Topband: Do short beverages "work"?
From: "ZR" <zr@jeremy.mv.com>
Date: Mon, 24 Jan 2011 16:26:56 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
I show better than modeled or book directivity as low as the 175KHz area 
EU/AF LF BCB with my 750-900' versions. For NDB's its often like pointing a 
flashlight. On the MF BCB its always amazing what can be found with an 8 
position switch.

Carl
KM1H


----- Original Message ----- 
From: "Herb Schoenbohm" <herbs@vitelcom.net>
To: <topband@contesting.com>
Sent: Monday, January 24, 2011 5:40 AM
Subject: Re: Topband: Do short beverages "work"?


> On 1/23/2011 8:45 PM, Bob Eldridge wrote:
>> Hi Rick
>> It depends what you mean by "really short".  Some consider a half wave
>> to be really short.  Beverage Rice and Kellogg original AIEE paper
>> showed that there is not much difference in the pattern of a half wave
>> and a full wave, but considerable difference when you go to 2 wave.
>> They considered the half wave to be working as a Wave antenna, and for
>> sure the ones I have used (6 ft or so above ground) had useful
>> directivity on 160.
>> 73
>> Bob VE7BS
> Bob,
>
>
> I always test my Beverages on AM Stations at 1000KHZ  to 1400Khz which
> is about 1/2 wave for a 500 or 600 footer....these tests remove all
> doubts that a "short" Beverage is a superb antenna.  Stations off the
> back for example are covered by Stations in PR and Rep Dom on the
> front....but switching to the SW, S, and SSW Beverages the PR and Rep
> Dom stations disappear and out pops a religious stations in the
> Grenadines without any sign of the others. This is an easy test to
> remove a lot of doubt on pattern performance.
>
>
> Herb, KV4FZ
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK 

_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>