Topband
[Top] [All Lists]

Re: Topband: Beverage feeding

To: "'Lars Harlin'" <lars.harlin@one.se>, <topband@contesting.com>
Subject: Re: Topband: Beverage feeding
From: "Stein Roar Brobakken" <s-roabr@online.no>
Date: Wed, 8 Sep 2010 19:39:43 +0200
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Hi 
Super :) Thanks for all replies from people out there.

So we can play with some RX antennas.

73 Rag

-----Opprinnelig melding-----
Fra: Lars Harlin [mailto:lars.harlin@one.se] 
Sendt: 8. september 2010 05:38
Til: Stein Roar LA6FJA-K3RAG; topband@contesting.com
Emne: Re: Topband: Beverage feeding


> I wonder how much difference it is if I have antenna switch for different 
> RX Antennas in the field with 300 ft. 50 ohm coax, and then I take a 300 
> ft 75 ohm to my beverage feeding box from DX Engineering....
>
> Does this change of coax impedance mess up the RX signal even I use a 
> preamp ??? Or should I go straight with 75 ohm from the shack down to the 
> switch.???
>
> 73 LA6FJA Rag

Rag,

You go ahead an use your 75 ohms coax (CATV?), the missmatch wont matter at 
all!

73 de Lars/SM3BDZ


_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>