On 2/2/2010 6:31 AM, Pete Smith wrote:
> Thanks to everyone for responding so quickly to my call - I have the
> sample I need now.
>
>
Pete:
Since I am never exactly sure with a transceiver set with a low pitch
where the split should be to get within the stations 200hz RX B/W, could
I use a simple SRD and Skimmer to insure that I am calling in the DX
stations pass band or if he is a rare on get exactly on the station he
just worked up 2....or is the resolution not that accurate. I have
plenty of other Beverages that would reproduce most stations if they are
above the noise threshold.
Herb,
KV4FZ
On 2/2/2010 6:31 AM, Pete Smith wrote:
> Thanks to everyone for responding so quickly to my call - I have the
> sample I need now.
>
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|