With the loop close to the transmit antenna, noise coupling will be a
problem... Only a few solutions come to mind immediately..
One would be to relocate the loop so that the transmit antenna is in the loop's
null zone when the loop is pointed towards your favorite DX...
Another is to move the loop to the front yard, etc. to get the maximum
separation - even if you have to put it up after dark and take it down before
morning...
And you need to put a relay at the base of the transmit antenna so that it is
decoupled from the ground and the coax when in receive mode...
Longer term solution: Get a group of guys together and create a remote
receiving site...
denny / k8do
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|