At 11.16 30/01/2009 -0500, you wrote:
>1) Figure 7-98A on page 7-70 shows two grounds on the far end of the
>beverage. One is the ground on winding n2 of the transformer, which I
>included in my beverage. However, the schematic shows a second ground (to
>the left of T5n1), which is connected to one of the two beverage conductors.
>What is the purpose of this ground?
Maybe an error. In the first diagram, published on Communications
Quarterly (spring 1997) there is only the first ground.
By the way, someone knows the better system in order to measure the
impedance of this transformer?
Paolo I4EWH
--
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.552 / Virus Database: 270.10.13/1912 - Release Date: 23/01/2009
18.54
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|