-----Original Message-----
From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of Jim Brown
Sent: Friday, September 12, 2008 5:20 PM
To: Topband@contesting.com
Subject: Re: Topband: Noise cancellers performance
On Fri, 12 Sep 2008 15:03:33 +0200, Petr Ourednik wrote:
>if anyone compared DX Engineering NCC-1, the MFJ-1026 and the
>Timewave (JRC) ANC-4 noise cancellers?
I have used all four of these cancellers on 160 meters. The MFJ-1026, ANC-4,
SEM and DXE NCC-1. The NCC-1 works the best for us, with the 1026 coming in
second. I could never see any receiving improvement with the ANC-4 or SEM.
I use these devices with two outdoor antennas to create better signal to
noise ratios and dig weaker signals out of the QRN.
73!
Tim K3LR
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|