Topband: Beverage advice to bend or not?

["Neil Carr G0JHC" <g0jhc@blueyonder.co.uk>]

I can get the 1st 460ft of a beverage in a straight line at 10ft height,
then the remaining  125ft to get it to a preferred length of 585ft would
have to be at a 45deg angle.  My question is, should I cut the beverage at
460ft (A none standard length) or "turn the  45 deg corner" with the other
125ft for a 585ft recommended length?

 

Any advice appreciated.

 

Neil G0JHC

_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband