Topband
[Top] [All Lists]

Re: Topband: Wire Antenna

To: "KE5CTY Bob" <rtnmi@sbcglobal.net>,"'Topband 160'" <Topband@contesting.com>
Subject: Re: Topband: Wire Antenna
From: "Tom Rauch" <w8ji@contesting.com>
Reply-to: Tom Rauch <w8ji@contesting.com>
Date: Wed, 29 Jun 2005 06:01:59 -0400
List-post: <mailto:topband@contesting.com>
>  24 gauge wire is small for a KW or even 100 watts.
> Thinking about QRP to begin with and if it works out move
up to larger
> wire.

The largest concern is mechanical failure, not electrical
failure.

Fusing current of #24 copper wire is 29 amperes at dc, and
about 18 amperes at 2 MHz.

I wouldn't use it because of wind or mechanical reliability,
not power levels. Use it for wiring projects in the house.
Get some real wire, at least #16, for antennas and grounds.

73 Tom

_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>