All,
I've got a Inverted L with about 45 feet vertical and 120 feet.
I currently have about half the radials I need. When I put up the
antenna last year I was able to get a decent match using a coax stub. It
worked pretty well for a while, but at some point stopped presenting a
good match.
Is it evil juju to use a coax stub to match this antenna
(especially since I can run a KW on 160)?
If the coax stub is bad, does anyone have a good suggestion for
an economical source for doorknobs?
Thanks for any suggestions.
George (K8QM)
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|