Topband
[Top] [All Lists]

Topband: AY Technologies Remote Receiving Antenna Switch

To: "topband mailing list" <topband@contesting.com>
Subject: Topband: AY Technologies Remote Receiving Antenna Switch
From: "Jeff Maass" <jmaass@columbus.rr.com>
Reply-to: jmaass@columbus.rr.com
Date: Sun, 9 May 2004 21:42:09 -0400
List-post: <mailto:topband@contesting.com>
Gary Breed K9AY has completed his RAS-8x2 Remote Receiving
Antenna Switch product! You can see his specs and information 
at: http://www.aytechnologies.com/Products/RAS8x2data.htm. 

This device allows the selection of each of 8 receive antennas
(Beverages, Pennants, Flags, K9AY loops, EWEs,  BOGs, etc.)
from two stations simultaneously, while keeping proper
impedance relationships to the receiver receive antenna inputs. 

It will be of particular interest to Multi-Single, Multi-2, 
Multi-Multi, or Single-Op-2-Radio (SO2R) contest stations,
where receive antennas are useful for 160, 80, and (sometimes)
40 meters.   It would also be of interest to a lowband DXer
with more than one receiver used to sort weak signals.

I  have one of the early production test / beta versions
here because I kept pushing on Gary to complete this 
product! I've been using something similar for 25 years
here, originally built by K1LT for the W8LT operations
in the ARRL 160 Meter Contest. 

I took some photos of the inside, which can bee seen
at http://home.columbus.rr.com/jmaass/Radio/k9ay_ras8x2.htm. 

I expect that Gary will have one in the Array Solutions booth
at the Dayton Hamvention for inspection. 

This one will likely go down to the Signal Point PJ2T 
contest station before CQWW this year!

73,

  Jeff Maass  K8ND

  Caribbean Contesting Consortium - PJ2T
        http://www.pj2t.org
http://home.columbus.rr.com/jmaass/Radio/PJ2T_Aerial.htm
 

_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>