Re: Topband: ~ 1/4 wave 160 doublet

[Pat W <patw@cmgate.com>]

Jim,  I'm sure you know this already, but, using a multiple of
1/4 wavelength feedline(at 160m) will resonate your antenna.
 So, since you didn't specify the length of your feed line,
it is unknown what the impedance is at this time.
 Use Tla/Tlw to figure out the correct length required.

Regards - Pat W0OPW
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband