Topband: CHEAP BEVERAGE ANTENNA SUPPORTS

[gmguerin@voyager.net (George & Marijke Guerin)]

Hi All,
    The plastic tubing and pipe make good supports.  For best sliding of
wire, and least stress on the tubing/pipe, drill a hole where you want the
bottom of the slot and cut down to it or cut the slot and then drill a
larger hole at the bottom of the slot.  Since some of the plastic melts at a
low temperature, the drill friction makes kind of a ledge as well as an open
guide for the Beverage wire.
    Good luck    73        George    K8GG