Thanks to Tom, Natan, Bill, Earl and Mauri for setting me straight on the
potential problem with insulated yagi elements atop a shunt-fed tower.
Somewhere in my amateur radio education I'd missed the idea that high
voltages always appear at the top of a vertical, regardless of its
electrical height.
That being said, I'm planning to run only 100 watts on 160 for the
foreseeable future. The complexity of reworking both my 40-meter yagi and
my top C-3E to ground all the elements, coupled with uncertainty about the
effect on interaction between the two yagis, means that if I can't get away
with that power level then I'll have to drop the shunt feed idea altogether
and figure out something else.
W8JI:
>By changing height to 100 feet, no other changes, voltage
>becomes 2576v RMS or 3642 volts peak between the element and
>boom. Still high for the insulators I see on most antennas.
Thanks, Tom - I was wondering how you could quantify the voltage. Sounds
fairly safe with a 100-foot tower and 100 watts -- maybe ~900 volts peak?
The Force 12 antennas use PVC pipe with ~1/8" wall as the insulation.
73, Pete N4ZR
Contesting is!
The World Contest Station Database
is waiting for your input at
http://www.qsl.net/n4zr
--
FAQ on WWW: http://www.contesting.com/FAQ/topband
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|