Topband: Rx Loop and Tower Radiating Noise?

[i4jmy@iol.it (Maurizio Panicara)]

When you point to a tower that's only 40'apart of the loop, actually you
couple the loop to the tower (both are infact vertically polarized and only
0.075WL spaced).
Because of that, not necessarily the tower is the source of the noise but
you receive, through the loop (and attenuated), as you were receiving using
the tower itself.

73,
Mauri I4JMY




--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com