Topband
[Top] [All Lists]

Topband: Minimum discernible signal ?

To: <topband@contesting.com>
Subject: Topband: Minimum discernible signal ?
From: n4zr@contesting.com (Pete Smith)
Date: Wed, 10 Jan 2001 10:54:47 -0500
W8JI wrote:

>It also would be nice if someone tapped an engineer on the 
>houlder on occasion, and reminded him that key clicks are not a 
>necessary part of sending CW. 
>
>DSP filtered radios, without a narrow IF filter upstream of the DSP, 
>simply won't do that. The last time I looked A/D conversion with 
>enough speed and bits would cost a thousand bucks. That would 
>buy a lot of crystal filters, which when properly designed are just as 
>good in BW and don't suffer overload!
>
>Hopefully someday manufacturers will someday look at what is 
>important and improve operation on crowded bands.

Very interesting message, Tom.  Makes me wonder why someone with the
necessary technical smarts doesn't offer a modification for better CW to a
popular transceiver (the FT-1000MP comes to mind).  If International Radio
can significantly improve the AGC performance of these radios with a
relatively simple mod, perhaps they or someone else could do the same for
keying.

Back in the old days we used to shape the keying with a couple of
components in the key leads.  I assume it's not that simple any more(?).


73, Pete N4ZR


--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com


<Prev in Thread] Current Thread [Next in Thread>